Kezdőlap » Hangszerkészítőknek » Szerszámok, kellékek » Gyaluk » Rider No. 60 1/2 Low Angle Deluxe gyalu


        

Rider No. 60 1/2 Low Angle Deluxe gyalu

Új

Készleten

 

Ár (nettó) : 32 992 Ft
Ár (bruttó) (27 %):
41 900 Ft

Vásárolni kívánt mennyiség:
  db  

Professzionális No. 60 1/2 Deluxe gyalu

Élszög: 13.5 fok, kitűnő bütü gyalulásához

Állítható forgácsrés finom munkákhoz

Finoman állítható kés.

Sík talp, tolerancia: 0.04 mm

Élezett, 3 mm vastag O1 edzett acél kés.


súly: 800 g
test: 155 mm
kés szélesség: 35 mm
kés anyag: 3 mm vastag, O1 high carbon acél (HRC 63)
talp sík: +/- 0.04 mm
bronz alkatrészekkel

This is a fine example of the popular 60 1/2 pattern low angle block plane. This 60 1/2 Deluxe has that little bit extra about it, especially with its polished bronze cap. The blade is used bevel-up bedded at 13.5°, giving great performance especially on end grain and soft woods. All Rider planes are good quality and suitable for home or professional site or bench use.

Well made, the Rider version has many excellent features. The main casting is ductile iron chosen for its high strength and impact resistance. It has an adjustable mouth for fine or coarser work. The plane features micro depth adjustment and lateral blade control to achieve the thinnest of shavings.

The sole is 155 mm (6-1/8") long with a 35 mm (1.1/8") wide blade. The sole of the plane is flat and accurate to +/- 0.04 mm (0.0016"). Weighing only 815g (1lb 13oz), it is almost indispensable for most small trimming tasks.

Rider planes only require the bare minimum of initial preparation. Each blade is oil quenched, high carbon spring steel, hardened and tempered to HRC 63.

Every plane undergoes careful inspection in Axminster to ensure consistent quality. We are confident that Rider planes represent a good standard in traditional, quality plane manufacture and great value.

NDk1M