Kezdőlap » Hangszerkészítőknek » Szerszámok, kellékek » Gyaluk » Rider No. 77 2-in-1 Bullnose gyalu


        

Rider No. 77 2-in-1 Bullnose gyalu

Új

Készleten

 

Ár (nettó) : 23 150 Ft
Ár (bruttó) (27 %):
29 400 Ft

Vásárolni kívánt mennyiség:
  db  

Professzionális No. 7 2-in-1  Bullnose gyalu
súly: 663 g
test: 110 mm
kés szélesség: 27 mm
kés anyag: 3 mm vastag, O1 high carbon acél (HRC 63)
talp sík: +/- 0.04 mm
bronz alkatrészekkel

The Rider 2-in-1 plane combines the functions of a bull-nose plane using the small nose section or a chisel plane with the nosepiece removed. Cast from fine grey iron, it is precision machined, precision ground and polished to ensure accurate results. The sole is flat and the sides are square to the sole. The 27 mm(1-1/16") full width blade is micro adjustable for precise control of the depth of cut. The blade is a fraction of a smidgen wider than the body making it easier to work into a corner. The bronze, polished, arched lever cap makes the plane comfortable and easy to use. A shim between the body and nosepiece allows you to vary the width of the mouth for fine or coarse work. This plane’s original intention was for trimming of joints when it came to fine-tuning for the final fit of the joint. A function it ideally fulfils today.

Rider planes only require the bare minimum of initial preparation. The blade is oil quenched, high carbon spring steel, hardened and tempered to HRC 63, and only requires a little honing before use. We are confident that Rider planes represent a good standard in traditional, quality plane manufacture and great value.

Key Features

  • Dual purpose, two planes in one; bull nose plane and chisel plane
  • Micro depth control with knurled adjusting knob, solid bronze lever
  • 27mm full width blade, ideal for cleaning rebates
  • Supplied with shim to vary the width of the mouth
ZjliNz