Professzionális No. 69 1/2 Deluxe Low Angle gyalu
Élszög: 13.5 fok, kitűnő bütü gyalulásához
Állítható forgácsrés finom munkákhoz
Finoman állítható kés.
Sík talp, tolerancia: 0.04 mm
Élezett, 3 mm vastag O1 edzett acél kés.
súly: 950 g
test: 158 mm
kés szélesség: 41 mm
kés anyag: 3 mm vastag, O1 high carbon acél (HRC 63)
talp sík: +/- 0.04 mm
The Rider No. 69 1/2 Deluxe Low Angle Block Plane is a hybrid plane incorporating the best attributes of both its parents. It has the low blade angle of the No. 60 1/2 (13.5°), coupled with the size and width of a No. 9 1/2 (41 mm(1-5/8")). The blade is used bevel-up. All Rider planes are good quality and suitable for home or professional site or bench use.
The main casting is ductile iron chosen for its high strength and impact resistance. It has an adjustable mouth for fine or coarse work. The plane features micro depth adjustment and lateral blade control to achieve the thinnest of shavings.
The sole is 158 mm (6-1/4") long with a 41 mm (1.5/8") wide blade. The sole of the plane is flat and accurate. A weight of 950g (2lb 1-1/2oz), combined with the blade angle and extra width gives you a plane with outstanding potential.
Rider planes only require the bare minimum of initial preparation. Each blade is oil quenched, high carbon spring steel, hardened and tempered to HRC 63.
Every plane undergoes careful inspection in Axminster to ensure consistent quality. We are confident that Rider planes represent a good standard in traditional, quality plane manufacture and great value.